| Four-Lobed X-ring Seal |
 |
Four-lobed seals are elastomeric seal rings.
It offers 4 contact areas for sealing instead of the 2 of the conventional
standard O-ring. The unique cross section has good sealing characteristics
built in as part of its design, and because of this double seal action,
less squeeze is required to keep effective seal. This reduction in squeeze
means less friction and hence, improved seal life.
At pressure varies, Four-Lobed seals perform les movement from side to side.
The parting lines of X-rings are not on any of contacted areas. They are
installed between the lobes away from the sealing surface. The design prevents
the problem of leakage. |
 |
Standard Size Per AS-568 Series |
|
The following sizes are
available from existing tools
-004~050
-103~-170
-204~-276
-312~-382 &-386
-425~-464
We would like to work a new mold at our expenses in the standard sizes
that
we do not have it now. |
|
Material report available
NBR, EPDM, Silicone, Fluorocarbon and Fluorosilicone...per ASTM Specification |
|
Q.C.Level
AQL1.5
If there is any more critical requirement, please state on your inquiry. |
|
Contact Details
Sol Young Enterprises Co.,Ltd.
3F, No. 19, Sec. 2, Chung Hsiao E. Rd., Taipei, Taiwan, R.O.C.
Tel : 886-2-23930990
Fax : 886-2-23216761, 886-2-23412219
Email : yfent@tpts1.seed.net.tw
Contact : Mr. Eric Fang |
|
